This lot features a Vision Industries diagnostic X-ray tube and stand system equipped with a Eureka Linear MC150 collimator/Bucky unit, representing a complete wall-mounted upright radiographic imaging system as used in chiropractic, medical, or veterinary clinical settings. The system consists of a floor-to-ceiling vertical column rail (approximately 7-8 feet tall) in white and gray finish, a rotating X-ray tube head with degree-graduated angle dial showing both vertical and horizontal rotation indicators, foam-padded positioning handles, and the Eureka Linear MC150 collimator box with SID settings marked at 72 IN, 180 CM, 40 IN, and 100 CM with two large rotary selector knobs on a dark control panel face. The X-ray tube housing is cylindrical in white and gray polymer casing, mounted on a counterbalanced vertical travel carriage allowing height adjustment along the column. A Colorado Department of Public Health and Environment Radiation Machine Certification label is affixed to the tube assembly, bearing Registration #97039, Inspector #166, and an expiration date of 01-2027, confirming this unit was actively certified and inspected for clinical use in Colorado through early 2027 — a significant provenance detail for buyers requiring regulatory compliance documentation. The collimator rear panel shows a light-field aperture window with cross-hair grid, and associated wiring (red high-voltage cable and gray signal cables) remains attached. Condition is Very Good for a clinical-use unit; the white polymer housings show minor scuffs and light surface soiling consistent with professional medical office use, control knobs are intact and functional in appearance, foam handle grips show light compression wear, and no visible cracks or major damage to housings are noted. Buyers are responsible for verifying all applicable federal, state, and local regulations regarding purchase, transport, and re-installation of radiation-producing equipment; this unit is sold as-is for parts, research, display, or licensed re-installation by qualified medical physicists and radiological technicians.
X-ray machine must be removed and transported by certified professional technicians in accordance with Colorado regulations.
X-Ray Machine must be removed by licensed, certified professionals. Must follow the State of Colorado guidelines and possess the proper certifications and release forms. Please do not show up on your own to remove the machine.
The Frontage Sign must be removed by professionals and will require a lift and probably permits. Do your research before you bid.
Bring the proper sized vehicles and help to remove items, THERE WILL BE NO HELP ON SITE!